Úsáidtear tairní dín chun cumhdach tí, bratú agus braite dín a choinneáil in áit.
Tá tairní dín oiriúnach freisin d'adhmad crua agus bog, píosaí bambú nó plaisteach, teilgcheárta balla, troscán a dheisiú, pacáistiú etc.
Péint frith-meirge agus frith-chreimeadh chun nach mbeidh na tairní éasca le meirge.
Tá na tairní dín déanta as amhábhair ard-neart, níos marthanacha.
Comhlánaigh i sonraíochtaí agus cuma aeistéitiúil scagtha.
Sus | C | Si | Mn | P | S | Ni | Cr | Mo | Cu |
304 | 0. 08 | 1. 00 | 2. 00 | 0. 045 | 0. 027 | 8.0-10.5 | 18.0-20.0 | 0.75 | 0.75 |
304Hc | 0. 08 | 1. 00 | 2. 00 | 0. 045 | 0. 028 | 8.5-10.5 | 17.0-19.0 |
| 2.0-3.0 |
316 | 0. 08 | 1. 00 | 2. 00 | 0. 045 | 0. 029 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | 0.75 |
430 | 0. 12 | 0.75 | 1. 00 | 0. 040 | 0. 030 |
| 16.0-18.0 |
|
Brandaí Wire do Thíortha Éagsúla
mm | CN.WG | SWG | BWG | AS.WG |
1G |
|
| 7.52 | 7. 19 |
2G |
|
| 7.21 | 6.67 |
3G |
|
| 6.58 | 6. 19 |
4G |
|
| 6. 05 | 5.72 |
5G |
|
| 5.59 | 5.26 |
6G | 5.00 | 4.88 | 5.16 | 4.88 |
7G | 4.50 | 4. 47 | 4.57 | 4.50 |
8G | 4.10 | 4. 06 | 4. 19 | 4.12 |
9G | 3.70 | 3.66 | 3.76 | 3.77 |
10G | 3. 40 | 3.25 | 3. 40 | 3. 43 |
11G | 3.10 | 2. 95 | 2. 05 | 3. 06 |
12G | 2.80 | 2.64 | 2.77 | 2.68 |
13G | 2. 50 | 2.34 | 2. 41 | 2. 32 |
14G | 2. 00 | 2. 03 | 2. 11 | 2. 03 |
15G | 1. 80 | 1.83 | 1.83 | 1.83 |
16G | 1.60 | 1.63 | 1.65 | 1.58 |
17G | 1. 40 | 1. 42 | 1. 47 | 1.37 |
18G | 1. 20 | 1.22 | 1.25 | 1. 21 |
19G | 1. 10 | 1. 02 | 1. 07 | 1. 04 |
20G | 1. 00 | 0. 91 | 0. 89 | 0.88 |
21G | 0. 90 | 0. 81 | 0. 81 | 0. 81 |
22G |
| 0.71 | 0.71 | 0.73 |
23G |
| 0. 61 | 0.63 | 0.66 |
24G |
| 0. 56 | 0. 56 | 0. 58 |
25G |
| 0. 51 | 0. 51 | 0. 52 |
Cineál agus Cruth Ceann Tairní
Cineál agus Cruth Tairní Shank
Cineál agus Cruth Pointe Tairní